Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Sano, Tomokazu*; Eimura, Takayuki*; Hirose, Akio*; Kawahito, Yosuke*; Katayama, Seiji*; Arakawa, Kazuto*; Masaki, Kiyotaka*; Shiro, Ayumi*; Shobu, Takahisa; Sano, Yuji*
Metals, 9(11), p.1192_1 - 1192_13, 2019/11
Times Cited Count：15 Percentile：65.54(Materials Science, Multidisciplinary)The purpose of the present study was to verify the effectiveness of dry laser peening (DryLP), which is the peening technique without a sacrificial overlay under atmospheric conditions using femtosecond laser pulses on the mechanical properties such as hardness, residual stress, and fatigue performance. After DryLP treatment of the laser-welded 2024 aluminum alloy, the softened weld metal recovered to the original hardness of base metal, while residual tensile stress in the weld metal and heat-affected zone changed to compressive stresses. The fatigue life almost doubled at a stress amplitude of 180 MPa and increased by a factor of more than 50 at 120 MPa. As a result, DryLP was found to be more effective for improving the fatigue performance of laser-welded aluminum specimens with welding defects at lower stress amplitudes.
Shimizu, Kazuyuki*; Hayashida, Hirotoshi*; Toda, Hiroyuki*; Kai, Tetsuya; Matsumoto, Yoshihiro*; Matsumoto, Yoshihisa*
Nihon Kinzoku Gakkai-Shi, 83(11), p.434 - 440, 2019/11
Times Cited Count：1 Percentile：6.23(Metallurgy & Metallurgical Engineering)Ishitsuka, Etsuo; Kenzhina, I.*; Okumura, Keisuke; Ho, H. Q.; Takemoto, Noriyuki; Chikhray, Y.*
JAEA-Technology 2018-010, 33 Pages, 2018/11
JAEA-Technology-2018-010.pdf:2.58MB
As a part of study on the mechanism of tritium release to the primary coolant in research and testing reactors, tritium recoil release rate from Li and U impurities in the neutron reflector made by beryllium, aluminum and graphite were calculated by PHITS code. On the other hand, the tritium production from Li and U impurities in beryllium neutron reflectors for JMTR and JRR-3M were calculated by MCNP6 and ORIGEN2 code. By using both results, the amount of recoiled tritium from beryllium neutron reflectors were estimated. It is clear that the amount of recoiled tritium from Li and U impurities in beryllium neutron reflectors are negligible, and 2 and 5 orders smaller than that from beryllium itself, respectively.
Matsuda, Hiroki; Meigo, Shinichiro; Iwamoto, Hiroki
Journal of Nuclear Science and Technology, 55(8), p.955 - 961, 2018/08
Times Cited Count：5 Percentile：46.12(Nuclear Science & Technology)We have started an experimental program to measure activation cross sections systematically in the proton-induced spallation reaction in structural materials commonly used in high-intensity proton accelerator-based facilities, such as Japan Proton Accelerator Research Complex (J-PARC). As the first step of the program, aluminum (Al) was chosen to verify the adequacy of the measurement technique implemented in a J-PARC proton beam environment because data of Al have been relatively well studied both by experimental measurement and simulation. Activation cross sections of 
Be, 
Na, and 
Na in Al were measured at proton energy points from 0.4, 1.3, 2.2 to 3.0 GeV, which could be delivered smoothly from the synchrotron. The validity of experimental data has been verified by introducing an effective proton numbers determination procedure. We compared the measured data with existing experimental data, the evaluated data (JENDL-HE/2007), and the calculations with several intra-nuclear cascade models by the Particle and Heavy Ion Transport code System (PHITS) code. Although the experimental data agreed with JENDL-HE/2007, the calculations underestimated about 40%. This could come from the evaporation model (generalized evaporation model) being implemented in the PHITS code. We found that the calculations agreed with the experimental data by an upgraded PHITS code.
Teshigawara, Makoto; Ikeda, Yujiro; Oi, Motoki; Harada, Masahide; Takada, Hiroshi; Kakishiro, Masanori*; Noguchi, Gaku*; Shimada, Tsubasa*; Seita, Kyoichi*; Murashima, Daisuke*; et al.
Nuclear Materials and Energy (Internet), 14, p.14 - 21, 2018/01
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)We developed an Au-In-Cd (AuIC) decoupler material to reduce induced radioactivity instead of Ag-In-Cd one, which has a cut off energy of 1eV. In order to implement it into an actual moderator-reflector assembly, a number of critical engineering issues need to be resolved with regard to large-sized bonding between AuIC and A5083 alloys by the hot isostatic pressing process. We investigated this process in terms of the surface conditions, sizes, and heat capacities of large AuIC alloys. We also show a successful implementation of an AuIC decoupler into a reflector assembly, resulting in a remarkable reduction of radioactivity by AuIC compared to AIC without sacrificing neutronic performance.
Koizumi, Mitsuo; Osa, Akihiko; Oshima, Masumi; Sekine, Toshiaki; Wakui, Takashi*; Jin, W.*; Katsuragawa, H.*; Miyatake, Hiroari*; Ishida, Yoshihisa*
Nuclear Instruments and Methods in Physics Research B, 204(1-4), p.359 - 362, 2003/05
Times Cited Count：7 Percentile：46.83(Instruments & Instrumentation)no abstracts in English
Ao, Hiroyuki; Hayashizaki, Noriyosu*; Paramonov, V.*
Proceedings of 21st International Linear Accelerator Conference, p.82 - 84, 2003/00
Annular Coupled Structure (ACS) has been developed for the 190-400MeV coupled-cavity linac of the JAERI/KEK joint project. Design optimization of the ACS cavity has nearly been completed using 2D and 3D codes. In parallel with the numerical analyses, half-scale aluminum models were fabricated to confirm the numerical results. The cold-model tests also aim to finish the detailed design taking mass production procedures into account. Especially, the machining and the tuning procedures are examined in detail from the viewpoint of cost reduction and quality management. The results of the model tests are presented with those of other recent R&D works on ACS, which include fabrication R&D performed with full-scale models.
Amaya, M.*; Une, Katsumi*; Minato, Kazuo
Journal of Nuclear Materials, 294(1-2), p.1 - 7, 2001/04
Times Cited Count：12 Percentile：64.73(Materials Science, Multidisciplinary)no abstracts in English
Al up to 2GeVY.-O.Lee*; J.Chang*; Fukahori, Tokio; Chiba, Satoshi
Journal of Nuclear Science and Technology, 36(12), p.1125 - 1134, 1999/12
Times Cited Count：10 Percentile：60.71(Nuclear Science & Technology)no abstracts in English
Maruyama, Yu; ; Moriyama, Kiyofumi; H.S.Park*; Kudo, Tamotsu; Y.Yang*; Sugimoto, Jun
NEA/CSNI/R(98)18, p.243 - 250, 1999/02
no abstracts in English
*; *; *
Inst. Phys. Conf. Ser., (159), p.455 - 458, 1999/00
no abstracts in English
Maekawa, Fujio; Ikeda, Yujiro; E.T.Cheng*
Fusion Engineering and Design, 42, p.229 - 233, 1998/00
Times Cited Count：3 Percentile：31.85(Nuclear Science & Technology)no abstracts in English
Maruyama, Yu; ; Moriyama, Kiyofumi; H.S.Park*; Kudo, Tamotsu; Y.Yang*; Sugimoto, Jun
JAERI-Conf 98-009, p.100 - 106, 1998/00
no abstracts in English
Maruyama, Yu; Yamano, Norihiro; Kudo, Tamotsu; Moriyama, Kiyofumi; Sugimoto, Jun
JAERI-memo 08-127, p.269 - 275, 1996/06
no abstracts in English
Maruyama, Yu; Yamano, N.; Moriyama, Kiyofumi; H.S.Park*; Kudo, Tamotsu; Sugimoto, Jun
NUREG/CP-0157, 2, p.161 - 172, 1996/00
no abstracts in English
Fuketa, Toyoshi; Ishijima, Kiyomi; ; Soyama, Kazuhiko; Ichikawa, Hiroki; Kodaira, Tsuneo
JAERI-Research 95-077, 28 Pages, 1995/10
JAERI-Research-95-077.pdf:2.49MB
no abstracts in English
V.Georgevich*; R.P.Taleyarkhan*; S.H.Kim*; Fuketa, Toyoshi; Soyama, Kazuhiko; Ishijima, Kiyomi
ORNL/TM-12956, 0, 117 Pages, 1995/06
no abstracts in English
Chihara, Junzo;
Journal of Physics; Condensed Matter, 6, p.10221 - 10236, 1994/00
Times Cited Count：16 Percentile：70.11(Physics, Condensed Matter)no abstracts in English
Si
particles under transient conditionsYanagisawa, Kazuaki
JAERI-M 93-129, 18 Pages, 1993/07
no abstracts in English
Fresenius'Z.Anal.Chem., (326), p.525 - 527, 1987/00
no abstracts in English
